Range of the section: |
diameter 0,4… 1,2 mm |
Diameter on the isolation: |
it is maximal 5 mm |
The current-response characteristics: |
20 A (10 A on each conductor) during not less than 10 min, without the deformation of the module |
Insulation resistance * |
|
“Dry” atmosphere: |
> 10 12 Ohm |
“Moist” atmosphere (standard ASTM Of d618, procedure F): |
> 10 12[Om] |
Salt fog: (standard ASTM Of b117) |
> 10 10 Ohm |
Immersion beside the water: (15 days before 3% solution Of naCI) |
> 10 10 0[m] |
The contact resistance |
|
R of material + R of the contact cross connection + by R of the contact connection of the wires |
< 10 m |
Increase in the contact resistance |
|
After climatic testings: |
<2,5 m |
After 50 connections - turning offs: |
<2,5 m |
Dielectric strength: |
>3 kV of direct current during 1 minute |